I was going to set my kitchen units at 870mm from floor.
Two issues.
1) Range cooker height would mean (if using 40mm worktop) i would need to set height at 855mm to be flush but leaves no adjustment in legs)
2) if i put height to save cutting kick boards i would need base units at 895mm.
What to do?
Two issues.
1) Range cooker height would mean (if using 40mm worktop) i would need to set height at 855mm to be flush but leaves no adjustment in legs)
2) if i put height to save cutting kick boards i would need base units at 895mm.
What to do?