Lack of hot water in mixer tap.

Joined
7 Nov 2003
Messages
33
Reaction score
0
Country
United Kingdom
Hi,

We have a combi boiler (Biasi Garda M90F). It does hot water on demand to three taps. The kitchen and bathroom sink are fine.

However the bath hot tap seems faulty. When you run it, you get a minute or so of water and then nothing. if you turn it off, run the cold tap for a few minutes then turn it back on, you get a few more minutes of hot water flow.

The tap is one of these combined ones with 2 separate spouts and a pull upp connector to the shower hose.

At first I thought it might be an airlock but reading through here suggests you don't get them in combi-boilers.

Any ideas what it might be please?
 
Sponsored Links
The tap itself is probably faulty, take it apart and clean and grease all the bits in it.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top