trying to fit a kessebohmer larder pullout "dispensa" with baskets, in an MFI kitchen 3 yrs old.the cupboard is 20 ins deep by 260mm wide by 75 ins high. the original larder pullout by MFI was too dear and left off the order.
now the lady has bought a larder pullout from homebase and the problem is that the frame does not fit.
a homebase cupboard is 75 1/2 ins high internal. the MFI one is 75 ins high and the effect is that the frame to carry the baskets will not travel smoothly, in fact its a baal ache to pull out. in the homebase store there is a 8mm gap between the top of the basket carrying frame and the top
bracket and it runs smoothly, in or out.
any ideas please
now the lady has bought a larder pullout from homebase and the problem is that the frame does not fit.
a homebase cupboard is 75 1/2 ins high internal. the MFI one is 75 ins high and the effect is that the frame to carry the baskets will not travel smoothly, in fact its a baal ache to pull out. in the homebase store there is a 8mm gap between the top of the basket carrying frame and the top
bracket and it runs smoothly, in or out.
any ideas please