Hi Folks,
I have been looking (fruitlessly) for a couple of white recessed spots suitable for a bathroom. They are replacing old tiltable ones which are not suited to the location. Both will be in Zone 2 above the bath.
The problem I have is the current (not that type of current!) cutout (not that type of cut out!) in the PB ceiling is approx. 88mm diameter. Most fittings are about the same and hence no overlap. I know you can get the adaptor plates/bezels but these dont seem to be available for IP rated fittings. Have tried Edmondsons, WF, Electricfix, TLC, Etc all to no avail.
Does any knowledgeable helpful sort know whether such a product exists....
Thank you.
I have been looking (fruitlessly) for a couple of white recessed spots suitable for a bathroom. They are replacing old tiltable ones which are not suited to the location. Both will be in Zone 2 above the bath.
The problem I have is the current (not that type of current!) cutout (not that type of cut out!) in the PB ceiling is approx. 88mm diameter. Most fittings are about the same and hence no overlap. I know you can get the adaptor plates/bezels but these dont seem to be available for IP rated fittings. Have tried Edmondsons, WF, Electricfix, TLC, Etc all to no avail.
Does any knowledgeable helpful sort know whether such a product exists....
Thank you.