- Joined
- 24 Jan 2004
- Messages
- 121
- Reaction score
- 0
- Country
Hi, on my Potterton Puma 80 what pressure should the expansion vessel be at? What effect does increasing/decreasing that pressure have on the CH.
I have a couple of Lockshields that leak when fully/almost closed, to balance the system i need them almost closed. Can they be serviced whilst in use or should i replace them when i drain down to do the EV pressure?
Cheers
I have a couple of Lockshields that leak when fully/almost closed, to balance the system i need them almost closed. Can they be serviced whilst in use or should i replace them when i drain down to do the EV pressure?
Cheers