Ledger board bolt spacing for lean to roof.

Joined
2 Mar 2019
Messages
293
Reaction score
3
Country
United Kingdom
What is spacing for ledger board that spans 4.3m long and is beating on internal leaf block work?

The board is 7x2 the rafters will sit on top off the ledger board.

I was thinking 750mm centres staggered but starting at 200mm from bearing.

I'm using 140mm m12 through bolts.
Thanks
 
Sponsored Links
That’ll work. You can always add more later if you want. I just used screws to pin it up and build the roof and added the through bolts later on before the BCO came out
 
Sponsored Links
140 is a bit long it will end up in the cavity probably.

47mm board + 75mm wall = 122mm

18mm protruding for washer and nut.

Even if it were to go a little in cavity I've read there's no issues.

Cheers
 
What Is maximum spacing for bolts?
 
Last edited:

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top