Level Threshold patio

I always thought you were meant to have at least some kind of “channel” if you’re patioing up close to the dpc. But yeah I guess you’re right. The 150mm thing still gets specced all the time by BC for cavity walls so I guess they still enforce it?
 
Sponsored Links
In and case, "150mm below DPC" is an anachronism to the time of solid walls. And it has no affect on cavity walls due to what is known as .... a cavity.
o_O The Magic 8 Ball might say so but I don't think so , the cavity is to prevent moisture passing from the outer to inner leaf , the horizontal dpc is to stop damp rising up from the ground , as recommended by building control , NHBC and every architect as far as I know.
 
o_O The Magic 8 Ball might say so but I don't think so , the cavity is to prevent moisture passing from the outer to inner leaf , the horizontal dpc is to stop damp rising up from the ground , as recommended by building control , NHBC and every architect as far as I know.
So if damp gets above the DPC on the outer leaf where does it go, and how does it affect the inner leaf?

Compare with damp running down the outer leaf and settling on top of the DPC on the outer leaf. What happens to that?

Magic 8 ball says "Without a doubt"
 
Sponsored Links
:cry: There is no '75 whatever', it is 150mm.
I know the BR figure is 150mm, we all know that, the conversion has progressed beyond that though, so quoting and correcting that part of my response doesn’t really help.
 
So if damp gets above the DPC on the outer leaf where does it go, and how does it affect the inner leaf?

Compare with damp running down the outer leaf and settling on top of the DPC on the outer leaf. What happens to that?

Magic 8 ball says "Without a doubt"
Brickwork above dpc can get damp when it rains and dry out in drier conditions because it isn't in permanent contact with the ground. The horizontal dpc is a barrier to prevent rising damp going up any further . No offence to Magic 8 ball but I have never met a single architect, building surveyor, BCO, NHBC surveyor/inspector, construction manager, SE, builder or bricklayer who doubted the use of horizontal dpc's in walls , and I have dealt with quite a few of those sort of people, so I think I will stick with my theory on dpc's.
 
B0llox. Just leave a small gap, full with 20mm gravel and build up the patio sloping away from the house. Make sure the gravel is clear of soil and crap each year.

Caveats: monitor your adjoining walls for damp. Expect some comeback from surveys when you look to sell.

Solution: dig it back out.
 
That refers to “just go for it but be prepared for either no problems or a world of pain”

I’ve been posting prolifically this evening because I’ve had a skin full. Beware.
 
Here’s a load of photos of my project so far, if anyone’s interested!

I dug out a channel between the house/garage and planned patio area and built a small restraining wall with breeze blocks to support the slabs.

The channel is graded towards the surface water drain down the side of the house. I mixed some concrete and sloped the base of the channel away from the house.

I then bedded a perforated land drain pipe in the bottom of the channel and connected it the the surface water drain pipe.

I proceeded to dig out for the patio so finished level would end up level with the DPC and creating a slope away from the house & garage.

Then I filled with hardcore and compacted to level with my dwarf wall (obviously still making sure my falls were correct) and started laying my 900x450 porcelain slabs, overhanging the breeze blocks but still leaving a gap to the brick walls.
 

Attachments

  • E4448FFC-CDE5-42A5-BD27-331B9794940B.jpeg
    E4448FFC-CDE5-42A5-BD27-331B9794940B.jpeg
    499.8 KB · Views: 319
  • EFA3D835-8956-474B-A101-89F3DC0F79E8.jpeg
    EFA3D835-8956-474B-A101-89F3DC0F79E8.jpeg
    549.9 KB · Views: 317
  • 162D551F-8276-4761-BC13-86699D0F13B4.jpeg
    162D551F-8276-4761-BC13-86699D0F13B4.jpeg
    440.6 KB · Views: 297
  • 58117CF4-E360-4247-9B00-AFA5246AE213.jpeg
    58117CF4-E360-4247-9B00-AFA5246AE213.jpeg
    480.7 KB · Views: 309
  • FFCD32D7-C225-4B65-A02F-C65AE4F14453.jpeg
    FFCD32D7-C225-4B65-A02F-C65AE4F14453.jpeg
    374.1 KB · Views: 296
  • D8742D42-46D4-4D90-BF37-62EBCA59F5A1.jpeg
    D8742D42-46D4-4D90-BF37-62EBCA59F5A1.jpeg
    486.7 KB · Views: 284
  • 600FD42C-738D-4DAB-9978-62C5FF37F590.jpeg
    600FD42C-738D-4DAB-9978-62C5FF37F590.jpeg
    448.8 KB · Views: 289
  • B040FB24-DE11-4B87-8752-9D3D03A46D54.jpeg
    B040FB24-DE11-4B87-8752-9D3D03A46D54.jpeg
    408.1 KB · Views: 285
  • 39CABE0B-7F0C-4174-9FE6-2D5CFC2241BD.jpeg
    39CABE0B-7F0C-4174-9FE6-2D5CFC2241BD.jpeg
    480.6 KB · Views: 308
  • 93A06642-4BCD-40F6-86C6-2EF4BD7A6A43.jpeg
    93A06642-4BCD-40F6-86C6-2EF4BD7A6A43.jpeg
    422.5 KB · Views: 312
Last edited:
I wrapped the the perf pipe in geo textile fabric with washed gravel and backfilled more gravel. I also fitted some DPM between the house/garage wall and the gravel.

Obviously it is not finished yet, but it’ll have to now go on hold till next year.

Thanks for all your help and advice.

I don’t know if the drain is an overkill or not, but after all the rain we’ve had in the last few weeks there’s no standing water anywhere.
 

Attachments

  • C8E69853-2840-4B0D-9FF3-7A1D2CE479BC.jpeg
    C8E69853-2840-4B0D-9FF3-7A1D2CE479BC.jpeg
    494.3 KB · Views: 291
  • 38264A28-AC48-45EE-A8EF-ED8B0C472C53.jpeg
    38264A28-AC48-45EE-A8EF-ED8B0C472C53.jpeg
    464.8 KB · Views: 270
  • 09290912-DC38-4FE4-B3E3-4627102B5387.jpeg
    09290912-DC38-4FE4-B3E3-4627102B5387.jpeg
    504.3 KB · Views: 280
  • 1CC4F8AB-F3C6-4918-BEC4-4A2754601055.jpeg
    1CC4F8AB-F3C6-4918-BEC4-4A2754601055.jpeg
    315.6 KB · Views: 265
  • 391618F6-D4D4-4670-95B8-3B2803169D00.jpeg
    391618F6-D4D4-4670-95B8-3B2803169D00.jpeg
    378.5 KB · Views: 282
  • 1CDC15F8-31C0-4D6B-B51B-4533E0D2DF62.jpeg
    1CDC15F8-31C0-4D6B-B51B-4533E0D2DF62.jpeg
    322.2 KB · Views: 309
  • 010BE2C5-8F85-466A-A0D2-7FE4EF92EF4F.jpeg
    010BE2C5-8F85-466A-A0D2-7FE4EF92EF4F.jpeg
    224.4 KB · Views: 273
  • CB097CC7-9555-4581-83D8-6AE34A6826CB.jpeg
    CB097CC7-9555-4581-83D8-6AE34A6826CB.jpeg
    276.7 KB · Views: 280
  • 4A46B213-336D-471F-947A-E5B2509F8194.jpeg
    4A46B213-336D-471F-947A-E5B2509F8194.jpeg
    304.2 KB · Views: 266
  • 961821B8-7B2C-4477-B0DC-779EB8F2FC64.jpeg
    961821B8-7B2C-4477-B0DC-779EB8F2FC64.jpeg
    336.8 KB · Views: 287
I’ve also built a sleeper planter bench and added some lights
 

Attachments

  • A756DAAB-3D56-4D63-A6C5-A776E008722A.jpeg
    A756DAAB-3D56-4D63-A6C5-A776E008722A.jpeg
    271.9 KB · Views: 214
  • FAA5AFE6-94D0-4B2B-8F22-E7DEC26F2559.jpeg
    FAA5AFE6-94D0-4B2B-8F22-E7DEC26F2559.jpeg
    285.9 KB · Views: 202
  • 22718CE1-C5DD-4DC3-97D6-C1142CAF95D9.jpeg
    22718CE1-C5DD-4DC3-97D6-C1142CAF95D9.jpeg
    315.8 KB · Views: 224

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top