HI - I recently changed a 2 gang 2 way dimmer swicth to a normal 2 gang 2 way switch as I thought it was causing this issue...but it didn't
I have 2 ceiling lights either side of the lounge, I can turn one light on and off independantly but the other light requires the first light to be on. I have 2 red wires that go into L1 & L2 and 1 black wire into COM 1 then a small bit of black wire from COM 1 to COM 2 - earth connected to term box - The new swicth has marking for L1 & L2 for 1 way or 2 way...not sure if that makes any difference. Any help would be much appreciated.
Thanks
M
I have 2 ceiling lights either side of the lounge, I can turn one light on and off independantly but the other light requires the first light to be on. I have 2 red wires that go into L1 & L2 and 1 black wire into COM 1 then a small bit of black wire from COM 1 to COM 2 - earth connected to term box - The new swicth has marking for L1 & L2 for 1 way or 2 way...not sure if that makes any difference. Any help would be much appreciated.
Thanks
M