I'm in the process of insulating my loft using standard mineral wool insulation rolls. I have bought 100 and 170mm rolls with the intention of laying the 100mm between the joists and then laying the 170mm rolls at right angles over the top.
I have managed with some degree of difficulty to lay the 100mm rolls, the main problem being it was often very difficult to get under the cabling. As far as I can determine the cabling is all for lighting (3 bedrooms, the landing, and the bathroom).
I've read on here and elsewhere no end of debate about whether it's OK to put insulation over cabling and for every post saying don't do it there's another saying do it. On top of that various people quote all kinds of measurements and calculations which just leave me confused and with a headache.
What I'd like to know is ... given the fact that I can't get the second layer of 170mm insulation under the cables and that I have no intention of rewiring the house simply to fit loft insulation, is there a practical workaround that I can use... such as cutting the insulation to leave gaps round the cabling. I guess that will look messy and not be as efficient but I don't want ANY risk of problems with the cabling due to overheating.
I'm sure I can't be the only person with this problem yet can't seem to find a practical answer to it that doesn't involve some sort of major disruption. So any help or advice would be very welcome and much appreciated.
Ian
I have managed with some degree of difficulty to lay the 100mm rolls, the main problem being it was often very difficult to get under the cabling. As far as I can determine the cabling is all for lighting (3 bedrooms, the landing, and the bathroom).
I've read on here and elsewhere no end of debate about whether it's OK to put insulation over cabling and for every post saying don't do it there's another saying do it. On top of that various people quote all kinds of measurements and calculations which just leave me confused and with a headache.
What I'd like to know is ... given the fact that I can't get the second layer of 170mm insulation under the cables and that I have no intention of rewiring the house simply to fit loft insulation, is there a practical workaround that I can use... such as cutting the insulation to leave gaps round the cabling. I guess that will look messy and not be as efficient but I don't want ANY risk of problems with the cabling due to overheating.
I'm sure I can't be the only person with this problem yet can't seem to find a practical answer to it that doesn't involve some sort of major disruption. So any help or advice would be very welcome and much appreciated.
Ian