loose dot n dab

Joined
30 Jan 2008
Messages
2,141
Reaction score
178
Location
Yorkshire
Country
United Kingdom
After stripping a wall ready for painting its become clear that some pb which is dot n dabbed to a wall is loose as you can see it move when pushed. Seems to be where there is a join between 2 boards. Am wondering how to secure it. Am thinking I could drill a few holes and squirt adhesive in then patch up or maybe just some rawl plugs with screws through and maybe adhesive squirted in there too.
Any other suggestions?
Thanks
 
Sponsored Links
D&D can be fixed back with screws based on the same principal that boards can be fixed to timber/metal studs.

The people who originally fixed the boards probably used finishing plaster.
 
Sponsored Links
The house is about 30 years old so I don't think I have any comeback on who did the work. I'll use screws and plugs thanks :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top