Had a new main moled in. They said there was a section of galvanised and copper just before the water meter. As you'd expect, issues all sorted now, can flush the toilet whilst having a shower and not even notice.
Yet, from post#1, "Water company sent "a guy" out to test flow, he took off the meter and put a tap straight on it and there was loads of flow. Visually it was obviously a lot more than what I get in the house. I can't remember the figures but it was basically maxing out the little measuring device they have where the water pours out the side. Ok so good pressure up to that point." ?
Yet, from post#1, "Water company sent "a guy" out to test flow, he took off the meter and put a tap straight on it and there was loads of flow. Visually it was obviously a lot more than what I get in the house. I can't remember the figures but it was basically maxing out the little measuring device they have where the water pours out the side. Ok so good pressure up to that point." ?
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local