M28 TRV to M30 Hive TRV

[Al Craft]

Hi - I need to convert a 28mm valve to 30mm. I purchased the attached converter, which screws on fine (if I remove the black plastic spacer), but the thread is not deep enough, so that pin on the adapter, does not engage with the valve pin.

Can anyone identity the valve / suggest an alternative adapter, please?

Many thanks

 

[muggles]

Just change the valve, much simpler

 

[Al Craft]

Thanks - but changing the 10 odd valves is probably out of my skill set and the cost of getting someone to do that, will be far higher than if I can source the correct adapter.

If someone can please identify the valve, I think I can find the adapter.

 

[CBW]

If someone can please identify the valve, I think I can find the adapter.

Nothing written on the old trv head? Where did you get existing adapters from?

 

[Al Craft]

The TRVs are Drayton (I think TRV3).
Does that mean the valves are also Drayton (I’m new to this)?
The adapters were purchased from Low Energy Supermarket https://lowenergysupermarket.com/
From looking online, it appears Drayton don’t make a converter - but I could be wrong.
Hopefully another company does make such an adapter?
Thank you

 

[CBW]

Adapters seem ok, so maybe speak to Drayton Technical? I’m sure they did a YT video on this recently.