I'm about to replace my old consumer unit with new split load one.
The incoming earth on the electric meter seems to be 6mm and gas pipe earth is also 6mm.
I thought that the earth should now be 10mm for gas and water pipes.
Should I call leccy board to replace incoming earth or can I still use 6mm.
Also the shower is connected to the meter via junction box which is crimped shut ie: I think it was installed by leccy board. Can I leave this as it is.
Any help appreciated[/b]
The incoming earth on the electric meter seems to be 6mm and gas pipe earth is also 6mm.
I thought that the earth should now be 10mm for gas and water pipes.
Should I call leccy board to replace incoming earth or can I still use 6mm.
Also the shower is connected to the meter via junction box which is crimped shut ie: I think it was installed by leccy board. Can I leave this as it is.
Any help appreciated[/b]