Hi Guy's, I have a horizontal mains vented cylinder in my loft, it is dripping from the pressure relief valve, I have changed the pressure vessel as is was faulty, and also changed the pressure relief valve. recently it has started dripping again, I really am not sure what it is.
I have tried all different pressures in the pressure vessel from 1.5 - 3.5 bar I am not quite sure what the pressure should be in the vessel.
The pressure of the system after the Pressure reducing valve is 2.8-3bar.
I have also flushed through the Pressure relief valve.
My next stage is to replace the new Pressure relief valve as it could be a dodgy one, but I thought I would post on here in case anyone had any ideas.
Thanks in advance Tim
I have tried all different pressures in the pressure vessel from 1.5 - 3.5 bar I am not quite sure what the pressure should be in the vessel.
The pressure of the system after the Pressure reducing valve is 2.8-3bar.
I have also flushed through the Pressure relief valve.
My next stage is to replace the new Pressure relief valve as it could be a dodgy one, but I thought I would post on here in case anyone had any ideas.
Thanks in advance Tim