I have a Makita track saw (SP6000K1) which is now about 2.5 years old - I have been very happy with it and it's been pretty much flawless.
Lately the plunge action has gone very stiff and now won't retract (raise back up) at the end of the cut - I tried WD40 on the pin that it seems to pivot on and can see no obvious signs of blockage or build up etc.
Any suggestions?
Lately the plunge action has gone very stiff and now won't retract (raise back up) at the end of the cut - I tried WD40 on the pin that it seems to pivot on and can see no obvious signs of blockage or build up etc.
Any suggestions?