Mapei

[aggy]

Does anyone know if Mapei Kerafluid HPR is ok to use on a screed with underfloor heating? I have the chance of getting a load for cheap but can't find any info that says one way or another.
Its a anhydrite screed that will be primed beforehand.

 

[aggy]

ok

 

[Richard C]

I use BAL exclusively but did initially have a look at this; the possible reason you have had no replies is that “Mapei Kerafluid HPR” appears to be exclusively a French market product. What translation I could find doesn’t give much info & I wasn’t even sure if it’s flexible which you will need with UFH. You could contact Mapei direct or maybe one of the other pro-tilers more familiar with Mapei products could help; sorry I just didn’t feel confident in advising you.

 

[tictic]

Does anyone know if Mapei Kerafluid HPR is ok to use on a screed with underfloor heating? I have the chance of getting a load for cheap but can't find any info that says one way or another.
Its a anhydrite screed that will be primed beforehand.

yes...you can mate sorry never seen your post last night when i was on

the HPR/HCA etc range from mapei is all the "low dust"..tech stuff,very the same as the weber "low dust range"...

also when using this range over heated screeds etc there is no need for the primer G...but double check this with mapei tech first mate..

 

[tictic]

this stuff is used all the time in the Middle East,was out early last year,and thats all i seen used on the sites.

again just check regarding the primer,but if i remember correctly there is no need for this....mainly used for the big tiles 600x600 and bigger...natural stone etc....