MDPE to hosepipe

[Basil]

Hi,
I have a length of MDPE pipe running underground down to my greenhouse. I am now going onto a water meter and would now like to use it for my water butts. I have ordered a Hydrobutt to send the water down to my waterbutts. Is there a fitting that I can use to reduce the 20mm MDPE so I can attach hosepipe to it to make the connection to my butts?
Thanks

 

[stem]

One of these will get you down to 15mm then you can pipe up to a tap with a hose connector. Or if you want to go straight from the MDPE pipe connector to the hose, a short length of 15mm pipe fitted with a hose connector.

If you don't have one, you will need a 'check valve' in the pipe somewhere.

 

[Basil]

That's great Stem thanks very much 😊