Metric doors needed HELP!

[Junior]

After skipping my doors, I found out they were non-standard metric sizes

2040 x 726 and 2040 x 626

B&Q (Thank god) do the 2040 x 726, does anyone know anywhere that will do 2040 x 626? White panel?

//www.diynot.com/shop/6_Panel_Interior_Door_H2040mm/10210

Any help greatly appreciated.

 

[masona]

Sounds like it may be 2' 3" door down cut down if the side jamb is wide enough to do it.

 

[Jasonb]

2040x626 is a standard metric size, Magnet do a 6 panel in both widths called "Colonist"

Jason

 

[Junior]

I read somewhere it's a standard metric size. My brother quipped I've gotten a standard "Euro House"......how I laughed.....hahaha......before I slapped him.

I can see Magnet's webshite, but I can't see the doors, I only see kitchens?

 

[breezer]

I can see Magnet's webshite, but I can't see the doors, I only see kitchens?

look harder then.

if you can not find where they are , find where they are not.

 

[Junior]

......on the tradesite.

I think my mate has a trade account set up, I'll drag him down there, thanks for the help.

 

[masona]

2040x626 is a standard metric size

Didn't know that, must say it's a unusual size which is 24 5/8".

 

[Jasonb]

Think it is something to do with the outside width of the frames fitting a modular system, the standard metric widths are 526,626,726,826 & 926 all by 2040 high.

It was in their trade catalogue product code is 03028909 for the 626mm & 03029002 for the 726mm.

Jason