My radiator valve is leaking slightly from under the cap.
I tried to unscrew the cap and then reach the nut and tighten it. But the screw holding the cap is rusted and the screw-driver will not hold.
Any advise how to unscrew the cap pleace?
In case I need to replace the whole unit where can one buy a two entry (10mm) TVR or manual valve?
Appreciate if you'll guide a a not-so-experienced- DIYer how to replace the valve or how to unscrew the cap so as to reach the nut and tighten it.... maybe this will stop the slight leak.
Thanks in advance for any help
Zack
I tried to unscrew the cap and then reach the nut and tighten it. But the screw holding the cap is rusted and the screw-driver will not hold.
Any advise how to unscrew the cap pleace?
In case I need to replace the whole unit where can one buy a two entry (10mm) TVR or manual valve?
Appreciate if you'll guide a a not-so-experienced- DIYer how to replace the valve or how to unscrew the cap so as to reach the nut and tighten it.... maybe this will stop the slight leak.
Thanks in advance for any help
Zack