In my infinite wisdom I whilst removing tiles from the shower I broke the black nylon spindle on the Mira excel shower unit which adjusts the temperature.
Mira have informed me that only the cartridge is a replacement part and not the spindle at a cost of £150 which is a little pricey for a piece of moulded nylon.
I can get a cartridge from shower spares for £100.
I have tried gluing it with Z-Poxy 30 minute epoxy resin but it failed as I was assembling it.
Does anyone have a spare U/S cartridge which I could strip to extract the spindle.
And any other suggestions are welcome.
Mira have informed me that only the cartridge is a replacement part and not the spindle at a cost of £150 which is a little pricey for a piece of moulded nylon.
I can get a cartridge from shower spares for £100.
I have tried gluing it with Z-Poxy 30 minute epoxy resin but it failed as I was assembling it.
Does anyone have a spare U/S cartridge which I could strip to extract the spindle.
And any other suggestions are welcome.