Hi All.
Planning on hanging a 7ft x 2ft (approx) mirror (4mm) on a tiled wall in the bathroom. Would 4 holes be enough or would I need 6, assuming that no adhesive is used?
The wall isn't 100% perfectly flat. I'm thinking of having a floating mirror effect by placing a solid cylindrical piece of wood at each of the corners between the mirror and the wall and drive the screws through the mirror holes, the wood and into the tiled wall to have the mirror stick out from the wall. Is this feasible and is there a better method of achieving this? Do these pieces of wood need to be made or is something for that purpose already available to buy?
What size/length/type of screws would be recommended?
__________________________________
Lynda, moderator
Sorry, but I have removed your other question as its an electrical one. Can I ask you to post that one again in UK electrics
Planning on hanging a 7ft x 2ft (approx) mirror (4mm) on a tiled wall in the bathroom. Would 4 holes be enough or would I need 6, assuming that no adhesive is used?
The wall isn't 100% perfectly flat. I'm thinking of having a floating mirror effect by placing a solid cylindrical piece of wood at each of the corners between the mirror and the wall and drive the screws through the mirror holes, the wood and into the tiled wall to have the mirror stick out from the wall. Is this feasible and is there a better method of achieving this? Do these pieces of wood need to be made or is something for that purpose already available to buy?
What size/length/type of screws would be recommended?
__________________________________
Lynda, moderator
Sorry, but I have removed your other question as its an electrical one. Can I ask you to post that one again in UK electrics