I have recently updated my mixer shower. It ran off 2 x 22mm pipes with a conventional shower hose and head. The 22mm pipes now run into a 15mm mixer tap, with piping fed behind the shower wall up to a monsoon style shower head but for some reason I have no hot water pressure. It's gravity fed. It worked the first few times and the cold water pressure is fine. I even had a pump installed which worked the first few times, but again, now all I get is cold water and when I switch to warm/hot the pump shuts down and I get no hot water at all.
My handyman bloke came and dismantled the mixer tap and the hot water flowed fine. He put the tap back on and the shower ran fine for 20 minutes. The second time I used it after he left, I had no hot water again. This has happened twice and no-one I know seems to understand what's going on.
Any ideas??
My handyman bloke came and dismantled the mixer tap and the hot water flowed fine. He put the tap back on and the shower ran fine for 20 minutes. The second time I used it after he left, I had no hot water again. This has happened twice and no-one I know seems to understand what's going on.
Any ideas??