Think what Goldberg was trying to say is have you brought taps that are designed for high pressure rather than gravity fed.If the flow rate was fine before then I would say you have brought incorrectly.
You could raise the level of the tank or fit a pump or you could buy the right taps!
Think what Goldberg was trying to say is have you brought taps that are designed for high pressure rather than gravity fed.If the flow rate was fine before then I would say you have brought incorrectly.
Yes - that is my view, but the point of my post was to bring the OP;s attention to the fact that TicklyT had asked the right questions, but they hadn't all been answered.
This issue of new taps with tiny waterways crops up again and again, and retailers just don't seem to ask responsible questions before selling the taps.
You could raise the level of the tank or fit a pump or you could buy the right taps!
checked with the retailer regarding basin mixer tap and all brassware came with the Tower shower. There are no kinks in the flexy pipes and have ran water to see if there is an airlock but still no luck.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local