- Joined
- 16 Dec 2018
- Messages
- 9
- Reaction score
- 0
- Country
I’m hoping someone might be able to help me out with a wiring diagram.
The system runs off a combi boiler.
There is a main house radiator circuit.
There are two additional zones with underfloor heating, each with its own pump and isolator valve.
Each of the three zones has its own thermostat.
I want a valve to open, the pump to run and cfh from the boiler only when the thermostat for that zone activates.
I have a plan in my head; I’m just convinced it’s right. I’m cautious I don’t want other zones to activate additional pumps.
I’ve found many wiring diagrams on the web, but none that feature multi pumps.
If you have a diagram to share it would be appreciated.
The system runs off a combi boiler.
There is a main house radiator circuit.
There are two additional zones with underfloor heating, each with its own pump and isolator valve.
Each of the three zones has its own thermostat.
I want a valve to open, the pump to run and cfh from the boiler only when the thermostat for that zone activates.
I have a plan in my head; I’m just convinced it’s right. I’m cautious I don’t want other zones to activate additional pumps.
I’ve found many wiring diagrams on the web, but none that feature multi pumps.
If you have a diagram to share it would be appreciated.