Nabis Bath Tap Problem

[dave12]

Hi,

I have a problem with a Nabis Elixer Mono Bath Tap.

Whilst trying to install the Tap I knackered one of the supplied pipes (with the screwed fitting for the Tap). Now I need to replace it! However, I cannot seem to find the exact size of thread required.

Ideally I would replace these rigid copper pipes with flexis, but again, I need to know the right size of fitting.

Having been to my local P Centre branch, they told me that the size wasn't standard and that they never had flexis. They seem to think it was 3/8".

So my question is, can anyone tell me where I can find a spec sheet for this Tap, and whether I can get a suitable fitting for it (preferably Flexi hose)?

 

[Nige F]

Apparently nabis is Wolseley own brand . ie. Plumb center just can`t get the staff

 

[Charnwood]

Pop into a 'proper' merchant - local independant with one of the flexis.
They are generally more helpful and knowledgeable than the nationals.

Most monobloc taps are either 10mm or 12mm thread.

Plumb Centre, more generally known as Dumb Centre.

 

[dave12]

Dumb Centre

I know what you mean!

Thanks for the replies, I'll try a local merchant like you say.

Cheers