Hi,
I'm in a block of flats, the waste pipe is shared with the flat next door. I get a small amount of the neighbour's waste at the bottom of my toilet.
From reading other posts I think it is either a partial blockage, or the slope on the horizontal waste pipe is not enough. The neighbour's waste pipe joins the horizontal pipe about a foot downstream of my toilet exit. I've seen that the slope should be 1 in 23 (thanks Softus) but it is boxed in so I can't tell.
Do I hire a camera to look down the toilet for a blockage - if so which one?
Do I measure the slope and if it is not enough then what next? Is the only solution changing the pipe (major work of course) or is there a work-around?
Is there some other possible issue?
Thanks
I'm in a block of flats, the waste pipe is shared with the flat next door. I get a small amount of the neighbour's waste at the bottom of my toilet.
From reading other posts I think it is either a partial blockage, or the slope on the horizontal waste pipe is not enough. The neighbour's waste pipe joins the horizontal pipe about a foot downstream of my toilet exit. I've seen that the slope should be 1 in 23 (thanks Softus) but it is boxed in so I can't tell.
Do I hire a camera to look down the toilet for a blockage - if so which one?
Do I measure the slope and if it is not enough then what next? Is the only solution changing the pipe (major work of course) or is there a work-around?
Is there some other possible issue?
Thanks