New plaster, few weeks later black mould

Joined
24 Feb 2010
Messages
1
Reaction score
0
Location
London
Country
United Kingdom
End of terrace house. Chimneys were removed.
Plaster boards were stuck on the old plaster or brick work.
Skimmed.
The bottom two rooms have developed black mould looking spots.
The up stair rooms are okay so far.

Is this real damp coming through the wall?
Lack of air circulation during the curing time? Can this be cleaned up using bleach?

See photos attached.
 

Attachments

  • back_rm_mould1.jpg
    back_rm_mould1.jpg
    94.9 KB · Views: 572
  • back_rm_mould2.jpg
    back_rm_mould2.jpg
    100.9 KB · Views: 436
  • back_rm_mould3.jpg
    back_rm_mould3.jpg
    120 KB · Views: 432
  • back_rm_mould4.jpg
    back_rm_mould4.jpg
    135.8 KB · Views: 369
  • back_rm_mould5.jpg
    back_rm_mould5.jpg
    127.4 KB · Views: 381
  • backroom_prep.JPG
    backroom_prep.JPG
    180.9 KB · Views: 338
  • front_rm_mould1.jpg
    front_rm_mould1.jpg
    166.7 KB · Views: 438
  • front_room_prep.JPG
    front_room_prep.JPG
    253.3 KB · Views: 425
Sponsored Links
Did you have windows open upstairs?

Id assume it’s a ventilation issue.

Normally weak bleach/water solution would be used to remove mould spots.
Don’t think I’ve tried it on plaster, test first in a small patch.
 
normally this time of year because of the extended drying time of the pb adhesive. wipe it off with a bit of bleach and get a dehumidifier in the room to help it dry out.
 
Sponsored Links
Do NOT use bleach. This is a common misconception.

Also, when you are in that room, wear a mask for your own safety along with other PPE.

Bleach can actually make the problem worse whilst superficially making it look better. Focus on the cause of this (which I will explain).

Mould needs the following conditions to grow, many of which are related:

1) Moisture - wet plaster provides that
2) A medium to grow on - plaster is very mould friendly
3) Lack of airflow - is the room ventilated
4) Lack of direct sunlight - common at this time of year
5) Lack of disturbance - I expect it has had this, unless you have been wiping or cleaning it
6) The right temperature - inside a house provides this easily

The key thing is to get the room dry, without moisture / water mould will not grow. Good ventilation or a dehumidifier would certainly help.

Your comment about 'chimneys were removed' - can you please clarify what you mean by this as it could have contributed to the issue (removing some ventilation)

There are antimicrobial products for dealing with mould, or, professional services if the problem is bad enough.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top