Hi
I want to install a 600 x 1600 type 22 double panel rad (2861W) to the right of the door below in the back half of my converted basement.
[/img]
There is an existing single panel 700 x 1800 rad to the right of the open door in the pic fed with 10mm pipe
The 10mm for the existing rad is fed from 15mm some 1.5 metres away.
The run from where I could Tee into the 10mm to the position of the new rad is 6.5 metres, from the 15mm it would be 7.5 metres.
Given the size of the new rad and distance would 10mm suffice or should I run 15mm?
Many thanks in anticipation
I want to install a 600 x 1600 type 22 double panel rad (2861W) to the right of the door below in the back half of my converted basement.
There is an existing single panel 700 x 1800 rad to the right of the open door in the pic fed with 10mm pipe
Existing Rad
- Benn1960
- 1
Exisiting Single panel 1800 x 700 rad fed by 10mm pipe some 1.5m from 15mm tee.
The 10mm for the existing rad is fed from 15mm some 1.5 metres away.
The run from where I could Tee into the 10mm to the position of the new rad is 6.5 metres, from the 15mm it would be 7.5 metres.
Given the size of the new rad and distance would 10mm suffice or should I run 15mm?
Many thanks in anticipation