Recently had a tiler who can to tile our kitchen, he did a great job of doing the tiles but he said he would come back to do the bit near the door where it would transition to the wood flooring in the hallway.
He basically didnt come back to finish off the job and now there is basically a full L shaped sharp ledge where the tiling finishes and the wooden floor starts, its about 11mm in height so its quite noticeable, a friend even stubbed their toe by accident and lets just say there was quite abit of blood involved.
we have looked high and low and cannot find what we 'think we need' which i thought would be:
.jpg)
but it seems as though the standard size is 8mm in height and we need 11mm.
i originally wanted something like this
but it requires to go underneath the tiles which is probably abit too late now as the tiles have already been laid.
any help would be appreciated. Thanks
He basically didnt come back to finish off the job and now there is basically a full L shaped sharp ledge where the tiling finishes and the wooden floor starts, its about 11mm in height so its quite noticeable, a friend even stubbed their toe by accident and lets just say there was quite abit of blood involved.
we have looked high and low and cannot find what we 'think we need' which i thought would be:
.jpg)
but it seems as though the standard size is 8mm in height and we need 11mm.
i originally wanted something like this
any help would be appreciated. Thanks
