Dear all,
First thanks in advance for a reply.
My issue is probably a simple one. Last year got my boiler serviced and I haven't touched it since then, it's been on circa 1.0bar, now the winter is kicking in I decided to bleed the radiators, knowing that the pressure bar would sink I decided to put at least another 0.5-1 bar by turning the valve at the bottom of the boiler which is what I've always done every year.
Anyway on turning this valve no water is going into the boiler, I'm not sure if the engineer forgot to switch something back on (valve or something). It's obviously too late to call him back now.
The boiler is a Baxi you can see the picture here
http://www.studentbunk.com/problem.jpeg
Many thanks!
First thanks in advance for a reply.
My issue is probably a simple one. Last year got my boiler serviced and I haven't touched it since then, it's been on circa 1.0bar, now the winter is kicking in I decided to bleed the radiators, knowing that the pressure bar would sink I decided to put at least another 0.5-1 bar by turning the valve at the bottom of the boiler which is what I've always done every year.
Anyway on turning this valve no water is going into the boiler, I'm not sure if the engineer forgot to switch something back on (valve or something). It's obviously too late to call him back now.
The boiler is a Baxi you can see the picture here
http://www.studentbunk.com/problem.jpeg
Many thanks!