Hi
I've connected up my new Ikea sink & the Atlant waste kit.
http://www.ikea.com/gb/en/catalog/products/40215522/
However, I've taken delivery of a washing machine today, and tested it this evening. As the machine started to pump out the water, the water began to leak out over the waste. The drain hose is connected to the waste with a jubilee clip (I've slipped the hose OVER the waste), which I suspect is the problem - the pressure of the water is too much.
So - what's the solution to this? With the Atlant waste, the drain hose waste is "created" by cutting the cap-end off the waste, but the hose is too large to fit "inside" the waste (unless I'm missing something)...
Sorry if I've not explained myself too well...
[/img]
I've connected up my new Ikea sink & the Atlant waste kit.
http://www.ikea.com/gb/en/catalog/products/40215522/
However, I've taken delivery of a washing machine today, and tested it this evening. As the machine started to pump out the water, the water began to leak out over the waste. The drain hose is connected to the waste with a jubilee clip (I've slipped the hose OVER the waste), which I suspect is the problem - the pressure of the water is too much.
So - what's the solution to this? With the Atlant waste, the drain hose waste is "created" by cutting the cap-end off the waste, but the hose is too large to fit "inside" the waste (unless I'm missing something)...
Sorry if I've not explained myself too well...
[/img]