- Joined
- 15 Jan 2008
- Messages
- 191
- Reaction score
- 13
- Country
Is it okay to use black rubber flex to feed an outside light?
Flex would be wired into an IP56 junction box taking it's feed from a SFCU inside from the lounge ring, so junction box is about 1.2m from the ground, need to run up from this and about 6 metres along the wall to the light.
1mm Black rubber flex or 1.5mm Hituf?
Thanks.
Flex would be wired into an IP56 junction box taking it's feed from a SFCU inside from the lounge ring, so junction box is about 1.2m from the ground, need to run up from this and about 6 metres along the wall to the light.
1mm Black rubber flex or 1.5mm Hituf?
Thanks.