I've just been asked by a friend if it's possible to wire up a double and a single socket in their back garden.
I was going to run a 2.5mm T&E from a double socket inside to a 30mA RCD adjacent to the inside socket then run a 2.5mm T&E through the wall from the RCD to the outside double socket. Then run a 2.5mm two core armoured cable from this newly fixed double socket under a doorway to a single socket around 10 feet away. Is this all ok?
Also do i need to use a RCD or would a 13A FCU for isolation be sufficient as the ring circuit I'm using is already protected by a 30mA RCD?
Thanks, in advance, for your help.
I was going to run a 2.5mm T&E from a double socket inside to a 30mA RCD adjacent to the inside socket then run a 2.5mm T&E through the wall from the RCD to the outside double socket. Then run a 2.5mm two core armoured cable from this newly fixed double socket under a doorway to a single socket around 10 feet away. Is this all ok?
Also do i need to use a RCD or would a 13A FCU for isolation be sufficient as the ring circuit I'm using is already protected by a 30mA RCD?
Thanks, in advance, for your help.