Hi all, hoping someone out there can help... Could I run a 4.4kw double oven of a dedicated 2.5 t+e ring main? Ie the only appliance off the ring main will be the oven? Any advice will be greatly received.
Oven feed
- Thread starter Jaysproate
- Start date
Sponsored Links
- Joined
- 15 Jan 2008
- Messages
- 191
- Reaction score
- 13
- Country
No probs.
Why do you want to run a ring circuit for a single appliance ?
Sponsored Links
You could yes, if it's dedicated supply. Does not require to be ring final circuit, a radial would be better.
2.5mm t&e can carry a maximum of 27A (that is without any cable de-ratings). Your oven requires 20A protective device on full load.
So you should be okay.
Personally would use at least 4.00mm cable.
2.5mm t&e can carry a maximum of 27A (that is without any cable de-ratings). Your oven requires 20A protective device on full load.
So you should be okay.
Personally would use at least 4.00mm cable.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
