Thank you for that Warners, I’ve just found out that my wife’s friend’s partner did almost exactly what you have outlined apart from the finishing coat. Will have a go once I’ve saved up for the Zinsser!Your going to have to clean it as will have skin oils and polish.
That black grime I often see on handrail will come off with meths or a good cirrus cleaner from supermarket. Depends what cleaners you have to hand and how bad it is, but get it clean.
Wire wool will smooth off any rough varnish in areas if you feel it needs a denib.
Zinsser BIN. Don't worry about opacity.
Acrylic primer undercoat 2 coats.
Top of whatever paint you want to use. Waterbased alkyd resists hand skin oils vs acrylic paints on hand rails. Crown fastflow is an alkyd as one example.
Thank you for that Warners, I’ve just found out that my wife’s friend’s partner did almost exactly what you have outlined apart from the finishing coat. Will have a go once I’ve saved up for the Zinsser!
Thanks for your very comprehensive and interesting reply- im convinced and now have your link saved ready to investigate fully before making the move.Every bit as good as BIN, but British and less expensive- Smith and Rodgers Blockade.
Blockade — Smith & Rodger - Paints & Shellacs since 1877
Blockade is an industry leading pure shellac for ultimate performace on plaster, wood and metal.www.smithandrodger.co.uk
Both are shellac based paints. The manufacturers recommend that you use meths to clean your brushes- don't- household ammonia does a much better job. The ammonia is alkali. You dip the brush in the ammonia and within minutes it starts to break down the paint. You can then wash the brush clean in a sink or basin. No residue will be left behind.
I decant a bit in to an old glass jar with a lid. It will last for ages in the jar. If you leave the jar for long enough, the white pigment will drop to the bottom and leave the clear ammonia above. Contrast that with meths, each time you dip the brush in, the meths is simply thinning the paint, dip the paint in a second time, there is more dilute paint in it.
Working with shellac based paints at this time of the year is more forgiving than using them during the height of summer. You can however add a bit of isopropyl alcohol to the thin it.
When I first started using BIN, I used rubbish, throw away brushes. Since discovering the household ammonia, I now use decent Purdy brushes with the shellac paints.
Oh.... this is important- if you plan you use a mini roller do not use a foam roller. I made that mistake once. As I was rolling, it almost doubled in length and became super floppy. The short mohair mini rollers are fine.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local