- Joined
- 8 Oct 2018
- Messages
- 19
- Reaction score
- 0
- Country
After 7 weeks of kitchen renovation (cowboy builders and no show plasterers) I was kinda overjoyed to have finally finished all plaster and about to start floor tiling.
Then a damp patch appeared at the threshold of our new patio doors where the void has been cemented Suspect this might be condensation (?) as it retreated when i opened patio door vents. Its a Victorian house however so I also suspect no DPC so now worried it could also be rising damp. Half the plaster was dead when we ripped out so maybe condensation is our culprit..who knows.
My question is could I paint some liquid DPM over areas of existing tile and cement before re-tiling and which product is easiest to use? Help
Then a damp patch appeared at the threshold of our new patio doors where the void has been cemented Suspect this might be condensation (?) as it retreated when i opened patio door vents. Its a Victorian house however so I also suspect no DPC so now worried it could also be rising damp. Half the plaster was dead when we ripped out so maybe condensation is our culprit..who knows.
My question is could I paint some liquid DPM over areas of existing tile and cement before re-tiling and which product is easiest to use? Help