Hello,
I am having a new bathroom fitted and bought a Vent Axia ACM100T in line fan fitted in the ceiling space. I had originally planned to have a pull cord switch to operate it, but am now thinking a PIR would be better. Could someone please advise me as to how to have it done and what parts are needed, before my electrician arrives. He's due to come in a week and I had bought the fan and a pullcord. CAn anyone advise me on what I would now need to buy in order to change from pull cord operation to PIR. I am figuring I would need a controller and PIR, but it's beyond my knowledge and my electrician is on holiday next week. I have found this controller and PIR, also by Vent Axia and just want to know if these are all that's needed and how and where they are positioned (before the ceiling is finished and boarded up!)
http://www.vent-axia.com/product/t-series-controller.html
http://www.vent-axia.com/product/vent-axia-visionex-pir.html
I don't want the ceiling plastered and then the PIR or controller need connecting to the fan. If I could just have the walls laid then the ceiling could be finished and when my electrician turns up he would connect it all up in place of the pull cord wire that is currently hanging from the ceiling void. Thanks and any help would be greatly appreciated.
I am having a new bathroom fitted and bought a Vent Axia ACM100T in line fan fitted in the ceiling space. I had originally planned to have a pull cord switch to operate it, but am now thinking a PIR would be better. Could someone please advise me as to how to have it done and what parts are needed, before my electrician arrives. He's due to come in a week and I had bought the fan and a pullcord. CAn anyone advise me on what I would now need to buy in order to change from pull cord operation to PIR. I am figuring I would need a controller and PIR, but it's beyond my knowledge and my electrician is on holiday next week. I have found this controller and PIR, also by Vent Axia and just want to know if these are all that's needed and how and where they are positioned (before the ceiling is finished and boarded up!)
http://www.vent-axia.com/product/t-series-controller.html
http://www.vent-axia.com/product/vent-axia-visionex-pir.html
I don't want the ceiling plastered and then the PIR or controller need connecting to the fan. If I could just have the walls laid then the ceiling could be finished and when my electrician turns up he would connect it all up in place of the pull cord wire that is currently hanging from the ceiling void. Thanks and any help would be greatly appreciated.
Last edited: