The dishwasher and washing machine are plumbed in as above - the washing machine outflow is just visible at the back. When either pumps out the sink plughole makes an annoying squelching noise. How can I rearrange the pipework to stop this happening?
well for a start the grey one is wrongly positioned so that dirty water from the sink will flow down into the appliance. You need to loop up the flexible hoses so that they are up to the underside of the draining board and above the water level of the sink.
well for a start the grey one is wrongly positioned so that dirty water from the sink will flow down into the appliance. You need to loop up the flexible hoses so that they are up to the underside of the draining board and above the water level of the sink.
The grey one loops up out of picture to the left. I thought they only need to loop up above the pipe to the drain so the water takes the path of least resistance?
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local
