Hello again folks.
I'm laying a 1.2m wide path using Marshall's Saxon paving in two sizes. Alternating 2 600x600 then 2 600 x 300 outside with a single 600 x 600 in middle and so on.
Marshall's recommend a gap of 8 - 10mm. Obviously the gaps will alternate horizontally - two gaps, one gap and so on. What's the correct procedure?
If I have two 8mm gaps do I then need a single 16mm gap? Or is there slight variations in the flag sizes?
Once again, any help appreciated.
Thanks, Jim.
I'm laying a 1.2m wide path using Marshall's Saxon paving in two sizes. Alternating 2 600x600 then 2 600 x 300 outside with a single 600 x 600 in middle and so on.
Marshall's recommend a gap of 8 - 10mm. Obviously the gaps will alternate horizontally - two gaps, one gap and so on. What's the correct procedure?
If I have two 8mm gaps do I then need a single 16mm gap? Or is there slight variations in the flag sizes?
Once again, any help appreciated.
Thanks, Jim.