Hello guys, could you please help me with my Flowsure+ boiler, it's losing all water pressure really quick (about 3-4 hours)
I've read various posts to help but this seems strange to me.
I have replaced the PRV (after the Potty engineer used it to drain the system it leaked) also the filling loop and valves, which didn't stop the problem.
Tested the expansion vessel, as I read somewhere and no water came out, can't find any leaks in the pipework or rads.
When the pressure drops the rads are normally still full which I can't understand.
I have an engineer coming out in 4 days as luckily the boiler is covered with domestic and general (£99 per year) but would like it fixed sooner if possible simply because it getting on my t*ts.
I'm not an expert but willing try anything that's not too expensive.
Thanks
p.s I know these boilers are sometimes crap, purchased after some bad advice from a engineer 4 years go who I can only describe as a cross between a hobbit and a dung beetle, with the brains of a cabbage patch kid.
I've read various posts to help but this seems strange to me.
I have replaced the PRV (after the Potty engineer used it to drain the system it leaked) also the filling loop and valves, which didn't stop the problem.
Tested the expansion vessel, as I read somewhere and no water came out, can't find any leaks in the pipework or rads.
When the pressure drops the rads are normally still full which I can't understand.
I have an engineer coming out in 4 days as luckily the boiler is covered with domestic and general (£99 per year) but would like it fixed sooner if possible simply because it getting on my t*ts.
I'm not an expert but willing try anything that's not too expensive.
Thanks
p.s I know these boilers are sometimes crap, purchased after some bad advice from a engineer 4 years go who I can only describe as a cross between a hobbit and a dung beetle, with the brains of a cabbage patch kid.