Hello,
this is one for those who know their wiring.
Exisitng System is
Potterton Profile Boiler
External CH pump
Honey Well Two Port Valve
Danfoss 102 Mechnical Clock.
CUstomer asked me to change the Danfoss 102 with model with CONSTANT override.
I confirmed with Danfoss Technical for appropriate alternative. They suggested the Danfoss 102E5 digital programmer. They said that the old unit could be pulled off the back plate and new the unit put in its place WITHOUT need for rewiring.
Did so but the new Danfoss would not operate, no red light denoting power. Checked live to programmer is still working, it was.
I do not know exactly what model Potterton Profile is the boiler but the wiring is as follows.
From Boiler to Programmer (clock) BLACK WIRE - Neutral (Blue) - Brown (live) - Yell/Green (Earth)
CH pump wires go to Boiler
Two port Valve Earth - Neutral - Live going to programmer (orange & grey not used)
Mains Neutral - Live - Earth Going to programmer.
QUESTION
1 - what is the black wire coming from boiler to programmer (is it SW Live?)
2 - what is the COMMON wire meaning often refered to in 102 E5 user manual
3 - how should the two port valve and the boiler be wired to programmer?
The Danfoss 102 and the 102E5 have the same terminal connectors 1, 2, 3, 4, 5, 6.
any help or useful suggestion would be very helpfull. Enjoy the weekend.
Regards
DD368
this is one for those who know their wiring.
Exisitng System is
Potterton Profile Boiler
External CH pump
Honey Well Two Port Valve
Danfoss 102 Mechnical Clock.
CUstomer asked me to change the Danfoss 102 with model with CONSTANT override.
I confirmed with Danfoss Technical for appropriate alternative. They suggested the Danfoss 102E5 digital programmer. They said that the old unit could be pulled off the back plate and new the unit put in its place WITHOUT need for rewiring.
Did so but the new Danfoss would not operate, no red light denoting power. Checked live to programmer is still working, it was.
I do not know exactly what model Potterton Profile is the boiler but the wiring is as follows.
From Boiler to Programmer (clock) BLACK WIRE - Neutral (Blue) - Brown (live) - Yell/Green (Earth)
CH pump wires go to Boiler
Two port Valve Earth - Neutral - Live going to programmer (orange & grey not used)
Mains Neutral - Live - Earth Going to programmer.
QUESTION
1 - what is the black wire coming from boiler to programmer (is it SW Live?)
2 - what is the COMMON wire meaning often refered to in 102 E5 user manual
3 - how should the two port valve and the boiler be wired to programmer?
The Danfoss 102 and the 102E5 have the same terminal connectors 1, 2, 3, 4, 5, 6.
any help or useful suggestion would be very helpfull. Enjoy the weekend.
Regards
DD368