- Joined
- 30 May 2004
- Messages
- 90
- Reaction score
- 0
- Country
Seems to be the topic of the day but there are a few things I would like to clarify.
Recently replaced my heat exchanger tank to an Albion Superduty CF45.
No problems here. As cooler weather approaches & the CH switches in I find the Potterton now has a tendancy to cut out when initially called but seems fine after a reset. This seems to happen every time now CH & HW are calling.
The thermostat is set to max. as recommended by Albion. I'm assuming it may be something to do with overheat or pcb connections. Any advice & what do you clean the connections with? I have some Maplins Switch Cleaner.
Recently replaced my heat exchanger tank to an Albion Superduty CF45.
No problems here. As cooler weather approaches & the CH switches in I find the Potterton now has a tendancy to cut out when initially called but seems fine after a reset. This seems to happen every time now CH & HW are calling.
The thermostat is set to max. as recommended by Albion. I'm assuming it may be something to do with overheat or pcb connections. Any advice & what do you clean the connections with? I have some Maplins Switch Cleaner.