I am installing a whirlpool bathroom suite and removing an existing suite. The old suite had a power shower installed over the bath which I will now remove as well. Can I use the pump and reconnect it to the bath shower / mixer taps?
The shower in its old state is plumbed in correctly (NO MAINS WATER), only the feeds from the tanks. As I am not changing the plumbing to the bath just repositioning it, I just want to use the pump to supply pressure to the bath/shower taps.
If I can do this, the pipe sizes are different from shower to bath. 15mm at pump for shower, 22mm at bath taps. Can I just fit the pump inline at the 22mm pipes using a change in pipe size just for the pump?
The shower in its old state is plumbed in correctly (NO MAINS WATER), only the feeds from the tanks. As I am not changing the plumbing to the bath just repositioning it, I just want to use the pump to supply pressure to the bath/shower taps.
If I can do this, the pipe sizes are different from shower to bath. 15mm at pump for shower, 22mm at bath taps. Can I just fit the pump inline at the 22mm pipes using a change in pipe size just for the pump?