- Joined
- 31 May 2007
- Messages
- 369
- Reaction score
- 0
- Country
Hi
Im in the process of draining down my unvented indirect system and changing some valves and a rad.
I want to cleanse it of the black sludge which I have quite a fair bit of and also use an innhibitor.
I am aware u just fill the rad or pour down the pipes the innhibitor, however Im not sure how I can use the cleanser. Im guessing it will have to be a power flush.
I have a vaillant ecoMax 630e, so if anyone can advise how this can be done with my system.
Im planning to use to clean the system
http://www.screwfix.com/prods/89458.../Sentinel-X400-Central-Heating-Sludge-Remover
and this as the inhibitor
http://www.screwfix.com/prods/79683...nel-X100-Central-Heating-Scale-Inhibitor-1Ltr
I have about 19rads in total so if you could also let me know roughly how much of this stuff i would need.
Thank you once again
Thank you very much
Im in the process of draining down my unvented indirect system and changing some valves and a rad.
I want to cleanse it of the black sludge which I have quite a fair bit of and also use an innhibitor.
I am aware u just fill the rad or pour down the pipes the innhibitor, however Im not sure how I can use the cleanser. Im guessing it will have to be a power flush.
I have a vaillant ecoMax 630e, so if anyone can advise how this can be done with my system.
Im planning to use to clean the system
http://www.screwfix.com/prods/89458.../Sentinel-X400-Central-Heating-Sludge-Remover
and this as the inhibitor
http://www.screwfix.com/prods/79683...nel-X100-Central-Heating-Scale-Inhibitor-1Ltr
I have about 19rads in total so if you could also let me know roughly how much of this stuff i would need.
Thank you once again
Thank you very much