Just connected 2 smoke alarms and wired them into the premier 24 expander, configured zones and all works ok. I have configured output 1 on speech dialler for fire warning message. Run test on unit and all works well. I have set fire zones onto user test, run test and all works well. Removed user test from zones. tested smoke alarm, panel work but I do not get anything from the speech dialler
Set zone type as 0 = Normally Closed
Tried Latched & Unlatched does not work either way.
The fire alarm works but no output to speech dialler??
I have RTFM but struggling
SafeDave
Set zone type as 0 = Normally Closed
Tried Latched & Unlatched does not work either way.
The fire alarm works but no output to speech dialler??
I have RTFM but struggling
SafeDave