Hi guys ive had some drylining done downstairs and skimming done upstairs. Reason being that my intention was not to do the upstairs but due to some unforseen circumstances i had to do the upstairs also but with a tighter budget.
The plastering has been done very very good but where the two different types of walls meet i need them to blend in.
Now I know i need to sand the blended plaster and feather it out but what would you guys recommend? Shall I do this by hand or use a power sander of some sort. If you recommend the power sander route, would you say a orbital sander or a normal sander?
Furthermore, there was another part where an old socket was removed and blanked off. I can feel the plaster lumped a little here, again what is the best method to rectify this i.e. where i paint, not being able to tell there was somethin there
cheers
The plastering has been done very very good but where the two different types of walls meet i need them to blend in.
Now I know i need to sand the blended plaster and feather it out but what would you guys recommend? Shall I do this by hand or use a power sander of some sort. If you recommend the power sander route, would you say a orbital sander or a normal sander?
Furthermore, there was another part where an old socket was removed and blanked off. I can feel the plaster lumped a little here, again what is the best method to rectify this i.e. where i paint, not being able to tell there was somethin there
cheers