Pressure from power shower playing up

Joined
22 Oct 2007
Messages
12
Reaction score
0
Country
United Kingdom
Hello - wonder if any of you could help

The hose on my power shower broke the other day, so I bought a new one. It looked exactly the same, yet when I installed it an insufficient amount of water came out of the shower head.

So I unattached the hose and turned the shower on and the water came out from the unit at a fairly weak rate (although seemingly not as weak as what came out of the shower head). Yet after a minute the pressure would build up and the water would burst out as it is clearly meant to. Unfortunately, if I then reattach the hose, the pressure immediately drops again.

Any ideas about what I can do?
 
Sponsored Links
Sponsored Links
just out of curiosity, how would one check one's power shower's filters?
 
Ah, so it's a power shower.

Thank you for going to the trouble of finding out. And please do not inconvenience yourself in the pursuit of other peoples knowledge.
 
I'm sorry if I dont give the right information - I'm a pensioner who, you may be surprised to know, a) is pretty knew to the internet and b) hasnt got a clue about plumbing, and given how much money I've got, and how much I've forked out for plumbers in the past few years, I was just hoping to see if there's a cheaper alternative.

I will go and look to see if I can find the make of the shower, but I know it isnt manufactured any more as the plumber told me that the last time something went wrong with it
 
Ah, so it's a power shower.

Thank you for going to the trouble of finding out. And please do not inconvenience yourself in the pursuit of other peoples knowledge.

If you read the opening post second paragraph you will see !!!
The hose on my power shower broke the other day,

Have you had a bad weekend?? ;)
 
If you read the opening post second paragraph you will see !!!
The hose on my power shower broke the other day,

Have you had a bad weekend??

It was sarcasm, wasted on you obviously Terry.
 
I'm not an expert on these things. Is the problem due to trapped air in the hot water cylinder causing an erratic flow of water? Does the pipe work include a surrey flange in the top of the hot water cylinder to eliminate air? Power showers need a dedicated outlet from cold water cylinder to prevent water starvation. Also does your shower have a built in pump or a separate double impeller pump...If you use a double impeller pump, one of the experts out there could confirm whether this should use a 22mm diameter pipe rather than 15mm.
:)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top