I have a Triton 200RE electric shower and a combi boiler.
I have tested the cold water rate and it is 10 litres/min (approx) in the kitchen and bathroom (bath tap). When testing the water rate via the shower it is less than 5 litres/min (the shower controls set to cold/minimum temp).
We are getting the occasional loss of pressure (according to the shower control panel) and no other taps/machines are switched on.
Is my pressure at the kitchen/bathroom ok ?
Is the flow rate via the shower ok ?
Is there any way to confirm if it is a shower or water pressure problem ?
The shower was in the house when we moved in and I suspect is at least 10 years old.
Any assistance appreciated
I have tested the cold water rate and it is 10 litres/min (approx) in the kitchen and bathroom (bath tap). When testing the water rate via the shower it is less than 5 litres/min (the shower controls set to cold/minimum temp).
We are getting the occasional loss of pressure (according to the shower control panel) and no other taps/machines are switched on.
Is my pressure at the kitchen/bathroom ok ?
Is the flow rate via the shower ok ?
Is there any way to confirm if it is a shower or water pressure problem ?
The shower was in the house when we moved in and I suspect is at least 10 years old.
Any assistance appreciated