Probs with P.I.R

Joined
11 Dec 2008
Messages
6
Reaction score
0
Location
Glasgow
Country
United Kingdom
Hi,I installed a Veritas R8 in September 2008 and used Rokonet Zodiac Pro P.I.R's.I have used this package before and never had any problems ,but now i am getting false alarms from Zone 2 P.I.R,which is a small dining room with a table and 4 chairs in it.I have wired it straight into the Zone 2 terminals and have set the pulse beat to no 2 in the P.I.R.The whole install has worked fine since September and there has been no alterations to the install or room.Is it possible a faulty P.I.R?
thanks

PS.The alarm gets set at 2200hrs and it triggers off around 0330 hrs
 
Sponsored Links
is it always around the same time? if so its up to you to find out what happens at that time

if its not there is always plan B
 
Swop the pir with one off another zone , and see if the fault moves with it.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top