- Joined
- 11 Dec 2008
- Messages
- 2
- Reaction score
- 0
- Country
I have a pumped shower fed from tank and cylinder with a warix flange on the cylinder. It is thermostatically controlled but won't get hot enough. Sometimes sounds like the pump is pumping air but I think hot water is getting to the mixer because the feed into it gets hot and if i fiddle with the controls the water gets warm for a few seconds but then turns icy. Could the thermostat need adjusting? If so how? Could the hot water be too hot and be cut off by the thermostat? Sorry if thats a stupid idea but it's driving me mad! Any suggestions would be appreciated. Thanks for reading